Notching Heavy Glass Over a Tile Bench and Custom Mirrors Georgetown Jobs

On Monday, we took on a job that required extra attention to detail before the glass even hit the fabrication floor. The homeowner had built a custom tile bench running right through the edge of the shower opening, which meant a standard rectangular panel wasn't going to fit. To get a tight fit, we had to measure and order a notched fixed panel designed to wrap cleanly over the bench lip.

Cutting Templates and Taking Precision Measurements

When dealing with a notched layout for frameless shower doors Georgetown TX installations, there isn't room for guesswork. Laser levels and vinyl templates are essential on these setups. Tile is rarely perfectly square, and a half-degree slope on a bench top can leave an unsightly gap if the glass cutout isn't angled to match.

We spent the first hour verifying wall plumb and checking the bench slope. Once the measurements were locked in, we sent the specs off for precision cutting and tempering. When the panel arrived at the shop, we brought it straight out to the jobsite to test-fit everything before setting any wall anchors.

Setting the Panel and Securing Hardware

Dropping a heavy notched glass panel into place takes a steady hand. You have to clear the vertical wall clamps while sliding the notched cutout right down onto the tiled ledge without letting the glass touch the tile surface directly.

We used solid brass clamps selected from our shower enclosure hardware finishes to match the existing plumbing fixtures. Setting neoprene blocks under the bottom edge prevented glass-to-tile contact, and we leveled the panel before anchoring directly into the wood studs behind the tile walls.

Completing the Bathroom Glass Package

While finalizing the shower glass installation, we also checked the wall dimensions above the double vanity. Homeowners frequently pair shower work with vanity upgrades, so taking measurements for custom mirrors Georgetown residential remodels usually happens during the same site visit. Checking both spaces at once keeps the layout cohesive and saves an extra trip later.

The notched panel sat flush along the bench tile with a clean, consistent joint line. If you are planning a bathroom update, reach out to Georgetown Glass & Door to schedule a measurement or quote.